Datum Product Range
Datum Systems consists of a comprehensive
range of products that will provide a permanent
solution to the most technically challenging
or troublesome of roofs. Our core products
involve the use of the systems highlighted
below. These can each further be developed
to create bespoke solutions for most applications.
Propped Frame System
The propped rafter system
is a factory manufactured system that can
be supplied to site in either a kit of parts,
or semi-manufactured. Propped rafter systems
are designed to transfer new loads via the
existing deck directly to existing primary
support structures; typically fixed at centres
from 1200mm to 3000mm, and provide a maximum
roof pitch of up to 35°
Our curved propped rafter
system is a variation of the propped rafter
system, and provides a support system for
curved roof scapes. This system is ideal
for creating a curved radius utilising a
new standing seam type roof sheet.
Full Spanning Truss
System
Spanning trusses are pre manufactured
trusses to suit all roof scapes, sizes and
profiles, available in fully manufactured
trusses, or easily handle able sections
or flat packed to suit site logistic requirements.
Two types of truss systems:
- Point load Truss - Fully
assembled truss requiring certain point
load areas on existing deck for support.
- Free Spanning Truss- Clear
spanning wall to wall (max 12m)
Post and Rail System
A simple post and rail system
that is fixed directly into the exiting
roof deck. This system is both simple in
install, and a cost effective over roofing
solution for the tightest of project budget
requirements
|